AB Elektronik introducing SPINpad, a High Speed Rotation Position Sensing Technology for next generation mobility.
In Battery Electric and Hybrid vehicles a fast and accurate rotor position measurement is essential for efficient E-motor controls. A precise position signal from stand still (0 rpm) to maximum rotation speed (30,000 rpm) is required for a high torque and high efficiency of the traction drive and for more power and extended driving range of the vehicle.
AB Elektronik has developed a new kind of resolver based on an active system in a two PCB design. The High Speed Rotation Position Technology HSRP is based on AB-Elektronik´s mature Autopad®-technology, which is established since 2007 and many million products in field. As the next step in development the new antenna system of the SPINpad and the development of a new ASIC allows the accurate high speed measurement for the E-motors.
The main components of the inductive system are the static element called Pad, a PCB with its transmitting and receiving antennas and the rotating target called Puck as an activated resonant element. The sensor is characterized in its flat envelope, minimal weight and its minimal impact on the rotation and acceleration.
The technology allows a very flexible adaption to the potential E-Mobility applications.
- In Resolvers
- Engines in electric and hybrid vehicles
- electric Power Steering
- active suspension systems
and many more.
Geometrically it can be designed either as a circular On-Axis as also a segmented Off-Axis setup. Through shaft and end of shaft locations can be realized. Additionally to the small axial dimension diameter of about 30 mm to several 100 mm are possible. Furthermore regarding accuracy targets and signal requirements the design can be optimized. For best robustness in assembly and against geometrical deviations in the motor, the system allows self-compensating functions.
Driven by a 5 V DC supply voltage the MCU can be reduced to one voltage level. Transmitting on trigger frequencies between 2.6 and 4 MHz, magnetic fields of the E-motor don´t have an effect on the measurement. Due to its immunity a shielding against the E-motor can be eliminated for a reduction of components and less required assembly space. For safety critical applications the senor is developed according ISO 26262. Combined with AB-Elektronik´s innovative encapsulation technology the SPINpad is robust against the harsh environment of transmission oils.
Special features of SPINpad:
- Slim dimensions
- B-field immunity
- Ready for ASIL-C according to ISO 26262
- 5 V DC supply voltage
- Cost efficient due to simplified design
- Analogous Sin/Cosin output (single ended and differential)
- Redundancy in the same envelope optional
The SPINpad technology offers a wide field of applications in engine and vehicle mounting area or drive train of hybrid or electric vehicles, from cars and trucks to off road vehicles. Application is possible on all rotating shafts (crankshaft, camshaft, wheels and gears). The new technology can replace existing systems where higher speed and accuracy are required. In addition, as a combined system the sensor can meet new system requirements of saving weight, space and costs.
SPINpad as a resolver
Internal combustion engines can incorporate a sensor to generate analog outputs (sine + cosine) in addition to the absolute angle (analog voltage or digital protocol PSI5; generated Sent) and pulses. The pulse output is freely programmable and can be used as a classic camshaft or crankshaft sensor.
The opportunities for camshaft adjustment are examples of how AB Elektronik is providing sensor systems that enhance conservation of our natural resources and further reduce CO2 emissions.
It is even possible to use the same sensor technology for camshaft and crankshaft. After mechanical adjustment, the pulse output can be programmed accordingly.
SPINpad as a combined sensor
In addition to the possible applications mentioned, other combinations of characteristics can be implemented according to customer requirements.
|Alternative descriptions||Typical applications|
Inductive position sensor, accurate sensing of the rotor position, High Speed Rotation sensor, Rotor position sensor
|Engines in electric and hybrid vehicles, electric Power Steering, active suspension systems|